Who are Destroy or Die?
Destroy Or Die is a UK based company developing effective and affordable products for drift cars, specialising in the Mazda MX5 and Nissan S-chassis series.
Like ourselves, Destroy or Die have developed their products through years of competing, prototyping and improving designs! Being involved in the UK Drift scene, they had the best experience to carry out this task and it shows in their final product!
What Products Do they Supply?
Adjustable Bottom Arms
Their adjustable bottom control arms allow for camber adjustment seperate from the factory bolts, allowing optimum caster and camber settings. These arms also give a significant wheel clearance increase for improved steering angle!
Front Super Knuckle
These modified front knuckles offer 40mm of roll centre correction eliminating bump steer giving superb control and steering input. Increased steering angle combined with this roll centre correction, allows for faster, high angle drifting!
Front Upper Camber Arms
Additional camber adjustment via the sliding ball joint. Chassis rail clearance to cater for lowered cars avoiding damage to control arm/chassis. The narrow shape gives additional wheel clearance over other upper arms available, Extra room for suspension strut solving the clearance issue commonly suffered after fitting aftermarket suspension.
Rear Super Knuckles
30mm Roll Centre Correction lowers the centre of gravity along with the roll centre without increasing camber giving superb active suspension dynamics and more even tyre wear. The super knuckle also allows you do run a Dual calliper set up on the rear allowing for additional handbrake calliper!
Rear Upper Camber Arm Set
Additional camber adjustment via the eccentric bolt in the knuckle. Chassis rail clearance to cater for lowered cars avoiding damage to control arm/chassis